Canon IXUS 245 HS User Manual Download Page 175

Page: 175 / 284

175

Viewing

Still Images

Movies

Switching Display Modes

Touch [

] to view other information on the screen, or to hide the

information. For details on the information displayed, see

260.

Simple Information

Display

Detailed

Information Display

Enables you to check

the focus (

177)*

*Not shown for movies.

•

Touching [

] in Playback mode hides all information and icons, but you can

still browse images (

172, 174). To restore the original display, touch the

screen again.

•

You can also change the display style used after shots by touching the

screen immediately after shooting and then touching [

]. However,

simple information display is not available, and no shooting information is

shown. Change the initial display mode as needed, in [Review Info] on the

[

] tab (

122).

•

Switching display modes is not possible while the camera is wirelessly

connected to devices other than printers.

Still Images

Movies

Overexposure Warning (for Image Highlights)

Washed‑out highlights in the image flash on the screen in detailed

information display.

Still Images

Movies

Histogram

High

Dark

Low

Bright

The graph in detailed information display

is a histogram showing the distribution of

brightness in the image. The horizontal axis

represents the degree of brightness, and

the vertical axis, how much of the image

is at each level of brightness. Viewing the

histogram is a way to check exposure.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands