Canon IXUS 245 HS User Manual Download Page 35

Page: 35 / 284

Included Software, PDF Manuals

•

When not connected to the Internet, there are the following limitations.

‑

The screen in step 3 will not be displayed.

‑

Some functions may not be installed.

•

The first time you connect the camera to the computer, drivers will be

installed, so it may take a few minutes until camera images are accessible.

•

If you have several cameras that were bundled with ImageBrowser EX on

the included CD‑ROMs, be sure to use each camera with their included

CD‑ROM and follow the on‑screen installation instructions for each. Doing

so will ensure that each camera will receive the correct updates and new

functions via the auto update function.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands