Canon IXUS 245 HS User Manual Download Page 29

Page: 29 / 284

Trying the Camera Out

You can also view the next image by

touching the right edge of the screen (in

the area indicated by frame at left). In

this case, [

] is displayed. Similarly, you

can view the previous image by touching

the left edge of the screen (in the area

indicated by frame at left), and in this

case, [

] is displayed.

Touch and hold [

][

] to browse through

images quickly.

Movies are identified by a [ ] icon. To

play movies, go to step 3.

Play movies.

Touch [ ] to start playback.

To adjust the volume, quickly drag up or

down across the screen during playback.

After the movie is finished, [ ] is

displayed.

•

To switch to Shooting mode from Playback mode, press the shutter button

halfway.

Erasing the Images

You can choose and erase unneeded images one by one. Be careful when

erasing images, because they cannot be recovered.

Choose an image to erase.

Drag left or right across the screen to

choose an image.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands