Canon IXUS 245 HS User Manual Download Page 177

Page: 177 / 284

177

Viewing

Still Images

Checking the Focus

To check the focus of your shots, you can magnify the area of the image

that was in the AF frame at the time of shooting.

Access Focus Check.

Touch [

] (

175).

A white frame is displayed where the AF

frame was when the focus was set.

Gray frames are displayed over faces

detected later, in Playback mode.

The portion of the image in the orange

frame is magnified.

Switch frames.

Touch the image in the lower right of the

screen, or move the zoom lever toward

> once.

The screen at left is displayed.

To switch to a different frame when there

are multiple frames, touch [ ].

Zoom in or out, or view other

image areas.

To zoom in or out, use the zoom lever,

touch the magnified image in the lower

right, or touch [ ] or [ ].

To adjust the display position, drag

across the image in the lower right of the

screen.

Touch [

] or the upper‑left image to

restore the original display in step 1.

COP

Summary of Contents for IXUS 245 HS





























































































































































































































































































Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands

Canon IXUS 245 HS, User Manual

Search results

Summary of Contents for IXUS 245 HS

Reviews:

Related manuals for IXUS 245 HS

Brands by name

Popular brands