Canon iR2000 Series Service Manual Download Page 315

Page: 315 / 738

CHAPTER 11 INSTALLATION

2000

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

11-1

1 Selecting the Site of Installation

The site must meet the following requirements; if possible, visit the user’s before the de-

livery of the machine:
1. There must be a power outlet that may be used exclusively for the machine and rated as

indicated (±10%).

Do not use piping used for gas services to connect the grounding wire.

2. The site must be between 15° and 30°C (59° to 86°F) in temperature and between 10%

and 80% in humidity. Avoid areas near a water faucet, water boiler, humidifier, and re-
frigerator.

3. Avoid areas near a source of fire or areas subject to dust or ammonium gas. If exposed

to direct rays of the sun, provide curtains.

4. The level of ozone generated by the machine in sue should not affect the health of the

individuals around it. Some, nevertheless, find the odor unpleasant, requiring adequate
ventilation of the room.

5. The machine must remain level, its feet fully in contact with the floor.

Summary of Contents for iR2000 Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands

Canon iR2000 Series, Service Manual

Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands