Canon iR2000 Series Service Manual Download Page 125

Page: 125 / 738

CHAPTER 3 IMAGE READING/PROCESSING SYSTEM

2000

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

3-13

4.6 ABC (auto background control)

The ABC function is used when the original has a dark background, not reproducing the

color of the background while correctly reproducing the text and images of the original.

The machine’s ABC function is enabled when the density adjustment function is set to

‘auto’ in copier mode; if selected, the ABC circuit is used for the work.

The digital image signals which are the result of A/D conversion are subjected to varia-

tion of dynamic range to suit the level of the background color of the original so that the
machine will recognize the background to be “white.”

F03-406-01

As shown, range A of a white background original is decreased like range B of a col-

ored background original to remove the color from its background.

Original surface

Original with
white background

Original with
colored background

Back
ground

FFh (white)

00 h (black)

FFh (white)

00 h (black)

Output level

dynamic range of a white background original.

dynamic range of a colored background original.

Summary of Contents for iR2000 Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands

Canon iR2000 Series, Service Manual

Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands