Canon iR2000 Series, Service Manual

Page: 280 / 738

CHAPTER 8 EXTERNALS AND AUXILIARY CONTROL SYSTEM
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
8-30
10) Remove the 4 screws [13], detach the
copyboard cover open/closed detecting
unit [14].
F08-605-10
When mounting the copyboard
open/closed detecting unit, be
sure to use the black binding
screw 3 mm in diameter. Take
care not to use the wrong screw.
11) Remove the 2 screws [15], detach the
humidity preventing plate[16].
F08-605-11
12) Disconnect the 2 connectors [17], and
remove the screw [18] of the grounding
wire; then, free the harness from the 2
clamps [19].
13) Remove the 2 screws [20], and pull the
analog processor PCB [21] to the front
to detach.
14) If you have replaced the PCB, go
through the instructions given for re-
placement (See to 2.3.6 in Chapter13).
[13]
[14]
[13]
[15]
[16]
[17] [21] [20]
[20]
[18] [19]
F08-605-12