Canon iR2000 Series Service Manual Download Page 338

Page: 338 / 738

CHAPTER 11 INSTALLATION

2000

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

11-24

2.13 Setting the Fax Functions (if equipped with fax functions)

2.13.1 Connecting the Line

1) Connect the modular cord [2] to the

modular jack (bottommost) for the line
on the back of the machine.

[2]

[1]

F11-213-01

2) Connect the other end of the modular

cord to the modular jack of the line.

2.13.2 Setting the Dialing Method

1) Press the Additional Functions key to bring up the User Mode screen.
2) Using the cursor keys

, select FAX SETTINGS, and press the OK key.

3) Using the cursor keys

, select USER SETTINGS, and press the OK key.

4) Using the cursor keys

, select TEL LINE SETTINGS, and press the OK key.

5) Using the cursor keys

, select TEL LINE TYPE, and press the OK key.

6) Using the cursor keys

, select TOUCH TONE or ROTARY PULSE, and press the

OK key.

2.13.3 Communications Test

1) Press the FAX key in the control panel so that the machine will be in fax mode. Skip this

step if the machine is already in fax mode.

2) Press the On-Hook key in the control panel, and check to make sure that the line tone is

heard. Otherwise, check the connection of the line.

3) Send/receive an original to check the operation and the image quality.

Summary of Contents for iR2000 Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands

Canon iR2000 Series, Service Manual

Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands