Canon iR2000 Series Service Manual Download Page 430

Page: 430 / 738

CHAPTER 13 TROUBLESHOOTING

2000

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

13-52

3.5.2 Pickup Assembly

Machine state

1) Do the pickup roller of the selected paper source (cassette, manual

feed tray) and the feed roller of the cassette rotate during print-
ing?

NO:

See “Pickup operation fails” for each source of paper.

Cassette

2) Is the cassette fitted correctly?

Is the paper size lever set correctly?

NO:

Correct the fault.

Cassette

3) Try a different cassette. Is the fault correct?

YES: Check the faulty cassette.

Paper

4) Is the paper curled or wavy?

YES: Replace the paper. Advise the user on the correct method of stor-

ing paper.

Paper

5) Try paper of a type recommended. Is the fault corrected?

NO:

Advise the user to use recommeded paper.

Roller

6) Is the surface of the pickup roller of the cassette and manual feed

tray and the feeding roller of the cassette normal?

YES: Check the sensor lever of the retry sensor (PS152) and registra-

tion paper sensor (PS101).

NO:

Clean the rollers. If damage/deformation is found, replace it.

Summary of Contents for iR2000 Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands

Canon iR2000 Series, Service Manual

Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands