Canon iR2000 Series Service Manual Download Page 373

Page: 373 / 738

CHAPTER 12 MAINTENANCE AND INSPECTION

2000

CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002

12-5

5. Multifeeder Pickup Roller

1) Open the manual feed tray, and remove the left cover.
2) Open the front cover, and release the developing assembly lever; then, detach the drum

unit.

3) Remove the multifeeder tray and the pickup guide (2 screws); then, detach the

multifeeder pickup roller.

4) Clean the roller with lint-free paper. If the dirt is excessive, use alcohol.

6. Multifeeder Separation Pad

1) Open the multifeeder tray, and detach the left cover.
2) Open the front cover, and release the developing assembly lever; then, detach the drum

unit.

3) Remove the multifeeder tray and the pickup guide (2 screws); then, clean the

multifeeder serration pad with lint-free paper.

7. Registration Roller

1) Open the multifeeder tray, and detach the left cover.
2) Open the front cover, and release the developing assembly lever; then, detach the drum

unit.

3) Remove the multifeeder tray and the pickup guide (2 screw); then, clean the roller with

lint-free paper while turning it by hand. If the dirt is excessive, use alcohol.

8. Transfer Charging Roller

1) Open the multifeeder tray, and detach the left cover. While taking care not to touch the

roller, turn the roller by hand while lightly wiping it with lint-free paper (not leaving pa-
per lint).

Do not touch the roller. Or, do not use water or solvent to clean the roller.

9. Static Eliminator

1) Open the multifeeder tray, and detach the left cover. Clean the static eliminator of the

transfer charging roller and the static eliminator of the pickup guide assembly with a
blower brush or lint-free paper.

Summary of Contents for iR2000 Series







































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands

Canon iR2000 Series, Service Manual

Search results

Summary of Contents for iR2000 Series

Reviews:

Related manuals for iR2000 Series

Brands by name

Popular brands