![background image](http://html.mh-extra.com/html/canon/ipf8400s-series/ipf8400s-series_user-manual_61609542.webp)
Note
•
If the cutter is damaged, contact your Canon dealer for assistance.
•
For details on the methods for cutting roll paper,
see "Specifying the Cutting Method for Rolls."
➔
P.483
About the Printhead
•
If the printhead rubs against the paper during printing, this may cause damage to the printhead. If the print-
head is rubbing against the paper, configure the
Vacuum Strength
in the
Step 5: Configure the amount of
ink used
dialog box as follows.
•
For paper-based media such as Heavyweight Coated Paper: Set to
Strong
or
Strongest
•
For film-based media such as CAD Tracing Paper: Set to
Standard
,
Strong
, or
Strongest
•
For thin paper of thickness 0.1mm or less: Set to
Weakest
Note
•
If the printhead still rubs even after changing the
Vacuum Strength
, set the
Head Height
to be higher in the
Step 5:
Configure the amount of ink used
dialog box.
•
For details on how to handle the printhead rubbing against the paper,
see "Paper rubs against the printhead."
➔
P.864
About Borderless Printing
•
When performing borderless printing on paper where the ink does not dry well, the cutter unit may leave
scratches where it touches the printed surface, or may not cut correctly. In this kind of situation, configure the
amount of time to wait for the ink to dry after printing using
Drying Time
in the
Roll Paper Settings
dialog
box.
Alternatively, if the paper cannot be cut well by the cutter, set the
Automatic Cutting Settings
to
User Cut
in
the
Roll Paper Settings
dialog box, and cut the roll paper using scissors, etc.
About the Print Quality
•
If the edges of images are blurry, set the
Vacuum Strength
to be weaker in the
Step 5: Configure the
amount of ink used
dialog box.
•
If lines are warped or scratched, set the
Head Height
to be lower in the
Step 5: Configure the amount of ink
used
dialog box.
•
If the amount of ink used is too much, wrinkles may appear and the ink may bleed in the printed material. Fur-
thermore, if the amount of ink used is too little, color production may be poor and lines may become scratched.
In this kind of situation, change the amount of ink used in the
Step 5: Configure the amount of ink used
dialog box.
•
If horizontal bands with different color tone appear in the printed material, execute
Paper Feed Adjustment
in
the
Step 4: Paper feed adjustment
dialog box. If you have already executed
Paper Feed Adjustment
, exe-
cute
Adj. Fine Feed
from the printer control panel and fine tune the amount of paper feed.
Note
•
For details on
Adj. Fine Feed
,
see "Fine-Tuning the Paper Feed Amount."
➔
P.722
•
If horizontal bands appear even after executing
Adj. Fine Feed
, refer to "Banding in different colors occurs" in
"Troubleshooting".
(See "Banding in different colors occurs.")
➔
P.866
•
If you cannot obtain sufficiently high print quality, change the maximum ink usage, or change the media type
used as the basis for the custom paper in the
Step 1: Select the standard paper
dialog box.
•
If there is no luster in printed material, set the paper used as the basis for the custom paper to a paper that
uses photo ink as the Black ink.
The types of Black ink used are displayed on the right side of each media type in the
Step 1: Select the
standard paper
dialog box.
Note
•
For details on problems with printing quality,
see "Problems with the printing quality."
➔
P.863
Warnings
iPF8400S
User's Guide
Handling and Use of Paper
Media Configuration Tool (Windows)
542
Summary of Contents for iPF8400S Series
