manualshive.com logo in svg

Canon iPF750 series, Service Manual

The Canon iPF750 series is a high-performance printing solution designed for technical and CAD projects. For easy maintenance and troubleshooting, the Service Manual is available for free download on manualshive.com. Unlock the full potential of your printer with this comprehensive manual, providing step-by-step instructions and valuable insights.

Share
Download
background image

Chapter 4

4-45

4.3.13 Multi Sensor

0023-3335

iPF765 / iPF760 / iPF750 / iPF755

a) Removing the Multi Sensor

1) Turn off the power, and then move the carriage onto the platen. Refer to "Disassembly/Reassembly > Points to Note on Disassembly and Reassembly > Opening
the Cap/Moving the Wiper Unit".
2) Remove the printhead to protect it.
3) Remove one screw [1] and disconnect one connector [2], and then the multi sensor [3].

F-4-101

b) Removing the Multi Sensor Reference Plate

1) Remove one screw [1], and then remove the multi sensor reference plate [2].

F-4-102

Do not touch the white sheets of the multi sensor reference plate.

c) Action following the replacement of the carriage unit/multi sensor

Because the distance between the multi sensor (in the carriage unit) and the nozzles (in the printhead) is varied from one unit to another, the printer as shipped has
its optical axis corrected to adjust the image write position. When the carriage unit or multisensor has been replaced or disassembled and reassembled, they require
adjustment.
Execute service mode under the following conditions:

* The multi sensor reference plate(QL2-3160: MOUNT, MULTI SENSOR REFERENCE) must be replaced at the same time whenever the carriage or the multi
sensor is being replaced.

- Service mode : SERVICE MODE > ADJUST > GAP CALIB.

- Service mode : SERVICE MODE > ADJUST > PRINT PATTERN > OPTICAL AXIS
 Media type : Photo glossy paper
 Media size : Media having a width equal toor larger then that of A2-size paper

[1]

[3]

[2]

[1]

[2]

Summary of Contents for iPF750 series









































































































































































































































































































































Reviews:

No comments

Related manuals for iPF750 series

GCC Technologies RX II Series User Manual preview
RX II Series
Brand: GCC Technologies Pages: 229
Wang 2272 Product/Maintenance Manual preview
2272
Brand: Wang Pages: 106
Great Computer Corporation Expert 24 User Manual preview
Expert 24
Brand: Great Computer Corporation Pages: 35
Great Computer Corporation Vogue TP-183P User Manual preview
Vogue TP-183P
Brand: Great Computer Corporation Pages: 44
Great Computer Jaguar II JII-61 User Manual preview
Jaguar II JII-61
Brand: Great Computer Pages: 47

Brands by name

Popular brands

Load more brands