Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual Download Page 165

Page: 165 / 300

165

oubleshooting

Remove any jammed paper from the edge guide.

1.  Open the edge guide.
2.  Remove any jammed paper.
3.  Close the edge guide.

When closing the guide, be careful not to get your fi ngers caught, as this may result in personal
injury.

Remove any jammed paper from the fi xing transport unit.

• The fi xing unit and its surroundings are subject to high-temperatures. When removing jammed

paper, take care not to touch anything in this area.

• The inner output guide and its surroundings are subject to high-temperatures. When removing

jammed paper, take care not to touch anything in this area.

Summary of Contents for imageRUNNER ADVANCE C9270 PRO













































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C9270 PRO

Reviews:

Related manuals for imageRUNNER ADVANCE C9270 PRO

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C9270 PRO, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C9270 PRO

Reviews:

Related manuals for imageRUNNER ADVANCE C9270 PRO

Brands by name

Popular brands