Canon imageRUNNER ADVANCE C9270 PRO Basic Operation Manual Download Page 174

Page: 174 / 300

174

Open the paper deck.

1 Press the open button.
2 Open the paper deck.

The inside lifter automatically
descends to the paper loading
position.

If the machine is in the Sleep mode (the touch panel is not displayed, and only

(Energy Saver)is lit), you

may be unable to open the paper deck unit. In this case, press

(Energy Saver)to reactivate the machine,

and then press the open button on the paper deck unit.

Remove any jammed paper.

Look carefully, as jammed paper may be diffi

cult to see.

Close the paper deck.

When closing the paper deck, be careful not to get your fi ngers caught, as this may result in
personal injury.

Summary of Contents for imageRUNNER ADVANCE C9270 PRO













































































































































































































































































































Search results

Summary of Contents for imageRUNNER ADVANCE C9270 PRO

Reviews:

Related manuals for imageRUNNER ADVANCE C9270 PRO

Brands by name

Popular brands

Canon imageRUNNER ADVANCE C9270 PRO, Basic Operation Manual

Search results

Summary of Contents for imageRUNNER ADVANCE C9270 PRO

Reviews:

Related manuals for imageRUNNER ADVANCE C9270 PRO

Brands by name

Popular brands