Canon IMAGERUNNER ADVANCE C5051, Maintenance Manual

Page: 148 / 160

2
Troubleshooting
List of Error Messages 2-76
# 861
Cause An error occurred while processing PDL data or image data.
Remedy Confirm the print settings you made when printing from a computer.
# 862
Cause 1 The saddle finisher trays have exceeded their stacking limits. (See Chapter 16, "Appendix," in Getting Started.)
Remedy Change the print data or print settings, and try printing again.
Cause 2 A combination of settings which is not supported was set.
Remedy Change the print data or print settings, and try printing again.
Cause 3 Data which is not guaranteed to be compatible was printed.
Remedy Change the print data or print settings, and try printing again.
Cause 4 You could not print the document when the tab paper is specified as the paper type and the Inner Finisher-A1 is attached.
Remedy You cannot output tab paper when the Inner Finisher-A1 is attached but the Copy Tray-J1 is not attached. If necessary, attach
the Copy Tray-J1.
# 863
Cause An error occurred while processing PDL data or image data.
Remedy Check the settings, and try printing again.
# 865
Cause A function related to performing jobs is restricted.
Remedy Contact your System Manager.
# 889
Cause You cannot scan or print the document because it has Scan Lock Information embedded.
Remedy Check the Scan Lock Information or contact your System Manager.
# 904
Cause The destination which is registered in [Favorite Settings] cannot be updated even when an address book is acquired from
another imageRUNNER ADVANCE/imagePRESS series connected to the network.
Remedy Register [Favorite Settings] using the touch panel display of the machine.