Canon IMAGERUNNER ADVANCE C5051, Maintenance Manual

Page: 23 / 160

1
Routine Maintenance
Paper Deck Unit-B1 (Optional)
1-11
Paper which has been rolled or curled must be straightened out before loading it into the paper deck unit.
Make sure that the height of the paper stack does not exceed the loading limit mark ( ) on the inside of the paper deck unit.
The paper deck unit holds approximately 2,700 sheets of paper (80 g/m
2
).
Load the paper stack in stages, adding approximately 500 sheets of paper (80 g/m
2
) at a time. If the paper deck unit can
accommodate more paper, the lifter will descend.
Only load A4 paper into the paper deck unit. Paper cannot be loaded horizontally.
If there are instructions on the package of paper about which side of the paper to load, follow those instructions.
When paper is loaded in the paper deck unit, the side facing down is the one printed on.
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it.
For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see
Chapter 16, "Appendix," in Getting Started.
4
Close the paper deck unit .
The inside lifter automatically rises, and the machine becomes ready for printing.
When closing the paper deck unit, be careful not to get your fingers caught, as this may result in personal injury .
•
•
•
•
•
•
•
•
•