Canon IMAGERUNNER ADVANCE C5051 Page 26 Maintenance Manual Download

Page: 26 / 160

Routine Maintenance

Envelope Feeder Attachment-D1 (Optional)

1-14

Hold down the four corners of the envelopes firmly, so that they and the sealed or glued portion stay flat.

Flap

If you use envelopes that have glue attached to their flaps, the glue may melt due to the heat and pressure of the fixing unit.

Take particular care to spread the envelopes out in the direction that they will be fed.

Do not print on the back side of the envelopes (the side with the flap).

If the envelopes become filled with air, flatten them by hand before loading them into the envelope feeder attachment.

Flap

•

Summary of Contents for IMAGERUNNER ADVANCE C5051

































































































































































Search results

Summary of Contents for IMAGERUNNER ADVANCE C5051

Reviews:

Related manuals for IMAGERUNNER ADVANCE C5051

Brands by name

Popular brands

Canon IMAGERUNNER ADVANCE C5051, Maintenance Manual

Search results

Summary of Contents for IMAGERUNNER ADVANCE C5051

Reviews:

Related manuals for IMAGERUNNER ADVANCE C5051

Brands by name

Popular brands