Canon imageRUNNER 5055 series, Service Manual

Page: 97 / 596

Chapter 2
2-41
F-2-128
18) Run the cable [1] through the code guide [2] and mount the code guide cover [3].
F-2-129
19) Connect the power cable to the outlet.
20) Turn ON the main power switch.
21) Check if the voice board is recognized.
Service mode
Select COPIER > DISPLAY > ACC-STS > PCI
If "Voice Board" is displayed, that means that the voice board is correctly recognized.
2. Setting After Installation
To use 'voice guidance' after power-on, it is necessary to set the followings.
1) Select > [System Settings] > [Voice Guide Manegement Settings] > [Use Voice Guide].
2) Select ON key (Default: OFF)
3) Press OK key.
3. Operation Check
<When Using the Voice Guidance>
1) Press the reset key for 3 sec or longer.
2) When the display of the number of copy is enclosed with red lines on the screen, "Voice Guidance" becomes enabled.
<When Stopping the Usage>
1) Press the reset key for 3 sec or longer.
There should no excessive bending of the cable.
[1]
[2]
[3]
[2]
[2]
[2]
[1]
[3]
[3]