Canon imageRUNNER 5055 series, Service Manual

Page: 405 / 596

Chapter 13
13-3
4) Check the waste toner case.
If half full or more, dispose of the waste toner in a vinyl bag or the like for collection; or, replace the waste toner case.
- If you need to dispose of the waste toner, be sure to do so in strict accordance with the regulations imposed by the local authorities.
- Do not dispose of waste toner in a fire. Doing so may cause an explosion.
5) Clean the copyboard glass and the reading glass.
6) Make test copies.
7) Make sample copies.
8) Check the operation of the leakage breaker.
With the power switch at ON, push the test switch of the leakage breaker to see that it operates normally (i.e., the breaker switch shifts to the OFF side to cut
off the power).
If the leakage beaker fails to operate normally, replace it, and run a check once again.
<Resetting the Breaker>
When you have made the check, turn off the main power switch, and turn on the breaker switch, and then turn the main power switch back on.
9) Put the sample copies in order, and clean up the area around the machine.
10) Record the final counter reading.
11) Fill out the Service Book, and report to the person in change. Be sure to update the history of checks on the leakage breaker in the Service Book.
13.3.2 Periodical Servicing Chart Reader Unit
0015-5271
iR5065 / iR 5055 / iR5075 / / /
Do not use solvents or oils other than those indicated.
T-13-5
13.3.3 Periodical Servicing Chart Printer Unit
0015-5272
iR5065 / iR 5055 / iR5075 / / /
Do not use solvents or oils other than those indicated.
T-13-6
left edge: 2.5+/- 2.0mm
Unit Location
Intevals
Remarks
as needed
Original exposure
system Copyboard glass clean
ADF reading glass clean
Scanner rail clean/lubricate Silicone oil (FY9-6011)
Scanner mirror (No.1
through No.3 mirrors) clean
Reflecting plate clean
Unit name Part
Intervals
Remarks
Upon
installation
every
250,000
every
500,000
every
1,000,000
Externals/
controls Ozone filter Replace
Air filter 1 Replace
Air filter 2 Replace
Dust-proofing
filter (primary) Clean Remove dust from surface.
Laser optical path Dust-proof glass Clean
Charging assembly Charging wire
(primary, pretransfer,
transfer/separation)
Clean Replace After replacement, execute
wire cleaning 5 times.
Charging wire cleaner
(primary, pretransfer,
transfer/separation) Replace Replace with charging wire
simulta neously.
Grid wire
(primary) Clean Clean Replace
Charging assembly shielding
plate (each charging
assembly) Clean Clean
Primary antistray toner sheet Clean
Roller electrode Clean Clean
Items