Canon imageRUNNER 5055 series, Service Manual

Page: 497 / 596

Chapter 17
17-1
17.1 Outline
17.1.1 Service mode screen configuration
0015-5495
iR5065 / iR 5055 / iR5075 / / /
As shown below, the service modes use three screen levels: initial screen -> main/intermediate item screen -> sub-item screen.
One set of modes are used for normal maintenance (Level 1 modes), and another set are used for troubleshooting (Level 2 modes).
F-17-1
The copier has the 7 service modes listed below.
F-17-2
17.1.2 Entering or selecting service modes
0015-5497
iR5065 / iR 5055 / iR5075 / / /
To execute a copier operation using a service mode, remove the cable from the external controller or the cable from the network before entering the desired mode.
Take care when using the FUNCTION (operation/inspection mode) mode, as the copier may malfunction and be damaged if a print job is received from outside
while an operation is executing with this mode in effect.
Initial screen
(Level 1)
Main/intermediate
item screen
(Level 1)
Sub-item screen
(Level 1) Sub-item screen
(Level 1)
User screen
Initial screen
(Level 2)
Reset key
Previous/next page
( )(2,8)( )
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
(Select an item.)
Main/intermediate
item screen
(Level 2)
Sub-item screen
(Level 2) Sub-item screen
(Level 2)
Previous/next page
(Select a main item from the top of screen.)
(The corresponding intermediate items are
then displayed and can be selected.)
(Select an item.)
( )(2)
COPIER
FEEDER
SORTER
BOARD
DISPLAY
I/O
ADJUST
FUNCTION
OPTION
TEST
COUNTER
Status display mode
I/O display mode
Adjustment mode
Operation/inspection mode
Specifications setting mode
Test print mode
Counter mode