Canon imageRUNNER 5055 series, Service Manual

Page: 158 / 596

Chapter 5
5-26
F-5-93
10) Free the harness from the wire saddle [1], and detach the motor frame [3].
- 6 Screw [2]
F-5-94
11) Disconnect the connectors [1] of the reader unit communication cable.
F-5-95
12) Shift the reinforcing plate [2] to the front.
- 4 Screw [1]
F-5-96
13) Free the harness from the wire saddle [3].
- 2 Connector [1]
- 1 Snap band [2]
F-5-97
14) Free the harness from the 3 wire saddles [1], and detach the ADF open/
close sensor base [3].
- 6 Screw [2]
F-5-98
15) Detach the reader upper frame [2].
- 24 Screw [1]
F-5-99
In the next steps, draw mark-off lines before removing the screw.
16) Remove the 2 cable fixing screws [2] of the No. 1 mirror base [1].
17) Remove the cable fixing spring [3].
18) Free the 2 hooks [4] of the cable from the right side of the reader unit
[1] [3] [2]
[2]
[1] [2] [2]
[2]
[3]
[1]
[1]
[1]
[2]
[1] [2] [3]
[1]
[1]
[1] [2] [2] [2]
[2] [3]
[1] [1] [1]
[1]
[1]
[2]
[1]