manualshive.com logo in svg

Canon imageRUNNER 5055 series, Service Manual

Share
Download
Canon imageRUNNER 5055 series Service Manual Download Page 373

Chapter 11

11-25

11.1.18 License for forwarding

0016-1418

iR5065 / iR 5055 / iR5075 /  /  / 

When the device is replaced due to lease up or trouble, it is possible to continue using the current license information of MEAP application by forwarding it to a

new device. The license is forwarded by CE because the hidden page of SMS is used.

1) Log in to SMS, stop the application to be forwarded (see 'Starting and Stopping a MEAP Application' in this manual).

F-11-41

2) Move to the download page of license forwarded for the device as sender (http:// IP address of device: 8000/sms/ForwardLicense).

F-11-42

3) Specify the application to be forwarded.

F-11-43

4) Click 'Disable' at Create Transfer License File.

Summary of Contents for imageRUNNER 5055 series





















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands