Canon iMAGERUNNER 2018i, Reference Manual

Page: 165 / 412

Specifying Common Settings 4-30
4
C
u
s
tom
iz
ing
Set
ting
s
Auto Paper Selection/Auto Drawer Switching
You can set which paper sources can be used for Automatic Paper Selection and
Automatic Drawer Switching. This setting can be made independently for all the
different functions of the machine, and is especially useful when you want to use
different paper sources for different purposes.
IMPORTANT
This function can only be used when two or more paper drawers are attached to the
machine (i.e., if you are using the imageRUNNER 2030i/2025i/2022i, or if the optional
Cassette Feeding Module-P1 is attached to the imageRUNNER 2018i.).
NOTE
•
Paper sources set to ‘On’ are used for the following functions:
- APS (Auto Paper Selection): The machine automatically selects the appropriate paper
size (paper source) based on the original’s size and copy ratio settings (when making a
copy), or the set ratio of the image (when receiving a fax).
- ADS (Auto Drawer Switching): If a paper source runs out of paper during a continuous
print job, the machine automatically selects another paper source with the same paper
size, and begins feeding paper from that paper source.
•
The default settings of Copy, Receive and Other are ‘Off’ for the stack bypass, and ‘On’
for the other paper sources.
•
The default settings of Printer are ‘On’ for all paper sources except for the stack bypass.
You cannot set the stack bypass for Printer.
•
If the stack bypass is set to ‘Off’ for Auto Paper Selection/Auto Drawer Switching, and an
optional cassette feeding module is not attached, the Auto Drawer Switching mode
cannot be used for the imageRUNNER 2018i.