manualshive.com logo in svg

Canon imagePROGRAF W6200, Service Manual, Page: 60 / 311

Share
Download
Canon imagePROGRAF W6200 Service Manual Download Page 60

3-13

W6200

Part 3: Operations

3.3 Main Menu

The printer has a Main Menu which provides the user with access to various adjusting
and configuring features, for example: adjusting print position; performing cleaning or
other maintenance features; auto-cutting, ink drying time and other print settings;
message language and other parameter settings.

3.3.1 Main menu operations

a) How to enter the Main Menu

To enter the Main menu, press the printer's 

[Online] button

several times.

b) How to exit the Main Menu

Press the 

[Online] button

once to exit the Main menu.

c) Buttons used in the Main Menu

• Selecting menus and parameters:

[<] button

or 

[>] button

• Entering a lower-level menu:

[  ] button

• Entering a higher-level menu:

[  ] button

• Setting menus and parameters:

[Enter] button

>

>

Summary of Contents for imagePROGRAF W6200
























































































































































































































































































































Reviews:

No comments