manualshive.com logo in svg

Canon imagePROGRAF W6200, Service Manual, Page: 19 / 311

Share
Download
Canon imagePROGRAF W6200 Service Manual Download Page 19

1.2 Ink

1.2.1 Ink passages 

Be careful not to touch the ink passages of the printer or to allow ink to stain the
workbench, hands, clothes or the printer under repair.
The ink flows through the ink tank unit, carriage unit, purge unit, maintenance-jet
tray maintenance cartridge and the ink tubes that relay ink to each unit.

Although the ink is not harmful to the human body, it contains organic
solvents.
Avoid getting the ink in your mouth or eyes.
Flush well with water and see a doctor if contact occurs.
In case of accidental ingestion of a large quantity, call a doctor
immediately.

Black ink

Glycerin 56-81-5, Carbon black

Photo Cyan/Photo Magenta/Yellow inks

Glycerin 56-81-5, Ethylene glycol 107-21-1

Cyan ink

Glycerin 56-81-5, Ethylene glycol 107-21-1, Copper compound

Magenta ink

Glycerin 56-81-5

Since this ink contains pigment, stains will not come out of clothing.

Part 1: Safety and Precautions

1-2

CAUTION

W6200

Summary of Contents for imagePROGRAF W6200
























































































































































































































































































































Reviews:

No comments