manualshive.com logo in svg

Canon imagePROGRAF W6200, Service Manual, Page: 175 / 311

Share
Download
Canon imagePROGRAF W6200 Service Manual Download Page 175

4. SERVICE PARTS

4.1 Service Parts

The service parts indicated below require careful handling.

4.1.1 Keep all packages with the warning not to turn over. 

Pay careful attention to all individually packaged service part (carriage unit, purge
unit, ink tank unit, and other parts) boxes marked "This side up" and handle
appropriately.

4.1.2 Feed roller

The feed roller is a functionally important part. Therefore, be careful that the roller is
not scratched or marked during storage or transport of the service parts, when
removing them from the individual boxes, when assembling, or performing any other
operations.
For details about handling of the feed roller, refer to 

Part 5:

5.2.8 a) Handling of the feed

roller

.

Part 5: Maintenance

W6200

5-6

Figure 5-6 "Right side up" Sign

Summary of Contents for imagePROGRAF W6200
























































































































































































































































































































Reviews:

No comments