Canon imagePROGRAF W6200 Service Manual Download Page 113

Page: 113 / 311

h) The printhead convert the received print signals internally, which are in serial

format, into the parallel data used by a single nozzle array, and then perform heat
pulse and AND processing to carry out the printing.

i) The CPU in the engine controller manages the overall print drive operations while

monitoring the status of the printer components based on the adjustment values
stored in the EEPROM.
The SDRAM is used as work memory.

j) The CPU in the system controller manages the overall image processing operations

while controlling key operation and message display based on the adjustment values
stored in the EEPROM.
The firmware is stored in the FLASH ROM.

Part 4: Technical Reference

W6200

4-4

Summary of Contents for imagePROGRAF W6200























































































































































































































































































































Search results

Summary of Contents for imagePROGRAF W6200

Reviews:

Canon imagePROGRAF W6200, Service Manual, Page: 113 / 311

Search results

Summary of Contents for imagePROGRAF W6200

Reviews: