manualshive.com logo in svg

Canon imagePROGRAF W6200, Service Manual, Page: 22 / 311

Share
Download
Canon imagePROGRAF W6200 Service Manual Download Page 22

1-5

W6200

Part 1: Safety and Precautions

1.3 Electrical Parts 

The electrical unit of the printer is activated when connected to the AC power supply.
At the rear of the printer are the system controller, engine controller, power supply and
interface connector. The head relay PCB and carriage relay PCB are incorporated in the
carriage unit, and the operation panel is located on the upper right cover.
When servicing the printer with the cover removed, be extremely careful to avoid
electric shock and shorting contacts.

Figure 1-4 Electrical Parts 

System controller

Engine controller

Power supply

Power connector

Head relay PCB

Carriage relay PCB

Operation panel

Interface connector

Summary of Contents for imagePROGRAF W6200
























































































































































































































































































































Reviews:

No comments