manualshive.com logo in svg

Canon imagePROGRAF W6200, Service Manual, Page: 122 / 311

Share
Download
Canon imagePROGRAF W6200 Service Manual Download Page 122

3. PRINTER MECHANICAL SYSTEM

The printer mechanical system can be roughly divided into two major components: the
ink passage and paper path.
The ink passage consists of ink tank unit and a carriage unit where printhead are
installed, purge unit, and maintenance cartridge and performs the supply, circulation,
and suction/removal of ink.
The paper path is comprised of the paper feeder and performs two types of paper feeding,
transport, and discharge of media.

This section presents an overview of the components of the mechanical system.

4-13

W6200

Part 4: Technical Reference

Figure 4-7 Printer Mechanical System

Ink tank unit

Purge unit

Carriage unit

Paper feed

Maintenance cartridge

Summary of Contents for imagePROGRAF W6200
























































































































































































































































































































Reviews:

No comments