Security
•
Administrator password setting
•
Setting Passwords Using Remote UI
•
Standard user mode settings
•
Select Enable/Disable for the standard user mode.
•
Operation restrictions
•
Restricts the following operations.
◦
Job history
◦
Restricts to display or print the print job history.
◦
Print from USB flash drive
◦
Restricts to print data on USB flash drive.
•
TLS server settings
•
Make settings related to certificates for encrypted communication.
Advanced TLS settings
enables you to specify the range of TLS versions to be used, the algorithm to
be used, and so on.
•
IEEE802.1X/EAP settings
•
◦
Authentication
◦
Select an authentication method for IEEE802.1X/EAP authentication.
Note
• In the case of using IEEE802.1X certificate,
Security
>
IEEE802.1X/EAP settings
>
CA
•
certificate
, and register the CA certificate.
• Supported authentication method
•
EAP-TLS(Extensible Authentication Protocol-Transport Level Security)
EAP-TTLS(EAP-Tunneled TLS)
PEAP(Protected EAP)
◦
Key and certificate settings
◦
Perform settings for key and client certificate.
◦
CA certificate
◦
Perform settings for the CA certificate that verifies a server certificate.
◦
Enable/disable IEEE802.1X/EAP
◦
Enable or disable IEEE802.1X/EAP authentication.
419
Summary of Contents for imagePROGRAF PRO-6600
