◦
Roll paper setting 6
◦
Select whether A1 or 600 mm is applied when a roll of an intermediate size is detected.
◦
Roll paper setting 7
◦
Select whether 600 mm or 24 in. is applied when a roll of an intermediate size is detected.
•
Adjust roll unit
•
Select this setting item when you replace the roll unit.
•
Keep margin at cut sheet end
•
When printing on the sheet using AirPrint, selecting
Enable
sets the trailing edge of the paper to 20 mm.
Select
Enable
if printing on the trailing edge of the paper is disturbed.
•
Advanced paper settings
•
Performs advanced paper settings for each media types.
•
Print advanced paper settings
•
Prints out each setting specified in
Advanced paper settings
.
•
Add priority roll paper width
•
When paper size is detected, set the width of the roll paper to be recognized first. Judge in order from 1
in the list.
•
Reset all detection priority data
•
Resets estimated data for all learned paper when
Auto detect
or
Auto with confirmation
is selected in
Media type selection method
.
•
Reset paper settings for all paper
•
Initializes each setting specified in
Advanced paper settings
.
Entering the administrator password is required if it is enabled.
Important
• The following information is deleted when paper information is reset to the factory defaults.
•
Estimated data for all learned paper when
Auto detect
or
Auto with confirmation
is selected
in
Media type selection method
.
Media type selection log.
396
Summary of Contents for imagePROGRAF PRO-6600
