Canon imagePROGRAF PRO-6600, Online Manual

Page: 675 / 939

Roll Paper Is not Fed Automatically
Check 1
Check the auto feed settings.
Select Enable for Roll paper auto feed on Paper-related settings .
Paper-related settings
Check 2
Check the setting for Paper retention settings .
Select While feeding for Paper retention settings on Paper-related settings .
Paper-related settings
Check 3
Make sure automatic paper feed can be used for the roll you are using.
Refer to "Paper Setting List(Roll Paper)" to make sure automatic paper feed can be used for the roll you are
using.
Paper Information List
Check 4
Make sure the roll is being fed.
If not, feed the roll manually.
Loading Rolls in the Printer
Loading Roll Paper in the Roll Unit
Check 5
Make sure the paper width of the roll is 250 mm or more.
The auto feed function does not support paper with a width of less than 250 mm.
If you use the roll with paper width less than 250 mm, select Disable for Roll paper auto feed on Paper-related
settings and feed paper manually.
Loading Rolls in the Printer
Loading Roll Paper in the Roll Unit
Check 6
Are you using an old roll holder?
Be sure to use the roll holder supplied with the printer.
Roll Holder Set
Check 7
The leading edge of the roll paper may not be cut properly.
If the leading edge of the roll paper is crooked or folded, the paper may not be fed correctly. Cut the leading
edge with scissors to straighten it. If the roll paper has a printed barcode, be careful not to cut the barcode part.
675