manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 41

What Can I Do with This Machine?

xl

Laser Safety

This product complies with 21 CFR Chapter 1 Subchapter J as a Class I laser product 
under the U.S. Department of Health and Human Services (DHHS) Radiation Performance 
Standard according to the Radiation Control for Health and Safety Act of 1968. Also, this 
product is certified as a Class I laser product under IEC60825‑1:1993+A1:1997+A2:2001, 
EN60825‑1:1994+A1:2002+A2:2001. This means that the product does not produce 
hazardous laser radiation.
Since radiation emitted inside the product is completely confined within protective 
housings and external covers, the laser beam cannot escape from the machine during any 
phase of user operation. Do not remove protective housings or external covers, except as 
directed by this guide. 
The labels shown below are attached to the laser scanner unit inside the machine and next 
to the cartridge, behind the front cover.

Use of controls, adjustments, or performance of procedures other than those specified in this manual may result 
in hazardous radiation exposure.

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands