manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 124

3‑27

Copying

1 to 2-Sided

This feature enables you to make two‑sided copies from one‑sided originals.

The 1 

▶

 

2‑Sided mode cannot be used with the Two‑page Separation or Image Combination mode.

If there are an odd number of originals, the back side of the last copy is left blank.
If the 1 

▶

 

2‑Sided mode is used with the Different Size Originals mode, the copies of different size originals 

will be printed as one‑sided copies on paper of their respective sizes. If you want to make two‑sided copies 
with different size originals, you must select the paper size beforehand. (See “Paper Selection,” on p. 3‑4.)

–
–
–

1

 

Press 

 (COPY).

2

 

Place your originals.

3

 

4

 

To set the orientation of the two-
sided copies:

1

2

①

 Select the type of two‑sided 

orientation.
Details of each item are shown below.
[Book Type]: The front and back sides 
of the copy will have the same top‑
bottom orientation.
[Calendar Type]: The front and back 
sides of the copy will have opposite 
top‑bottom orientations.

②

 Press [Done].

●

①

②

①

②

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands