manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 159

Sending Documents

4‑24

Scan Density and Original Type Settings

You can set the scan density and select the original type before scanning the original.

Manual Density Adjustment

You can manually adjust the scan density to the most appropriate level for the original.

If you select the Color mode, you should manually adjust the scan density.

●

1

 

Press 

 (SEND).

2

 

Place your originals.

3

 

① 

Specify the destination.

② 

Press [Scan Settings].

③ 

Press [Option].

For instructions on specifying destinations, 
see “Specifying Destinations,” on p. 4‑32.

4

 

① 

Press [Light] or [Dark] to adjust the scan 
density.
Press [Light] to move the indicator to the 
left to make the density lighter, or press 
[Dark] to move it to the right to make the 
density darker.

②

 Press [OK].

5

 

Press   (Start).

If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display, then press   (Start) once 
for each original. When scanning is complete, 
press [Done].
Scanning starts.
The scanned data is sent to the specified 
destination when scanning is complete.

To cancel the scan settings, press [Scan 
Settings], then press [Option], then 
[Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 

 (Reset).

–

–

①

②

①

②

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands