manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 217

Sending Documents

4‑82

7

 

①

 Select the destinations to store in the 

group address.

②

 Press [OK].

To cancel a selected destination, select the 
destination again to clear the check mark.
Press the alphanumeric keys (e.g., [ABC]) to 
display the individual keys for each letter or 
number. You can select a letter or number 
to restrict the displayed range of entries. 
Press [All] to return to the full address list.
If the desired destination is not displayed, 
press [

▼

] or [

▲

] to scroll to the desired 

destination.
Only destinations that are already stored in 
one‑touch buttons can be selected as part 
of a one‑touch button group address.
You can select a destination and 
press [Details] to confirm the detailed 
information related to the selected 
destination. Press [Done] to return to the 
previous screen.

8

 

–

–

–

–

–

①

②

9

 

①

 Enter a name for the group (up to 16 

characters).

②

 Press [Next].

The first character that you enter for the 
name is used for sorting the address list when 
you press keys, such as [ABC] and [DEF], on 
the Address Book screen.

10

①

 Enter a name for the one‑touch button (up 

to 12 characters).

②

 Press [OK].

11

  Press [Done] repeatedly until 

the Send Basic Features screen 
appears.

①

②

①

②

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands