manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 181

Sending Documents

4‑46

Using Group Addresses

Group Dialing enables you to specify a group of registered destinations in the Address 
Book or one‑touch buttons. This is useful if you want to send the same document to several 
destinations. You can register up to 499 destinations in one group.

To use this feature, group addresses must be stored in one‑touch buttons or Address Book beforehand. (See 
“Registering Group Addresses,” on p. 4‑67, or “Registering/Editing Group Addresses,” on p. 4‑81.)
To view the detailed information of a selected destination, select the destination, then press [Details].
You can erase destinations on the Send Basic Features screen before scanning. (See “Erasing a Destination,” 
on p. 4‑51.)

–

–
–

1

 

Press 

 (SEND).

2

 

Place your originals.

3

 

Specify a group address.

To specify a group from the 
Address Book:

1

●

2

①

 Select the destinations for the group 

address.

②

 Press [OK].

You can specify multiple groups at the 
same time.
To restrict the type of destinations 
displayed in the result list, press the 
Type drop‑down list, then press [Group].
To cancel a selected group, select the 
group again to clear the check mark.
To view the detailed information of a 
selected group, select the destination, 
then press [Details].

–

–

–

–

①

②

①

②

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands