Canon imageCLASS MF4370dn Basic Operation Manual Download Page 196

Page: 196 / 252

10-23

aint

enanc

Transporting the Machine

Transporting the Machine

This section describes the required procedures before transporting the machine.

For MF4380dn/MF4370dn

Follow this procedure to avoid vibration damage to

the machine when transporting it over a long

distance.

Turn OFF the main power switch.

Disconnect the power cord and all the
cables from the back of the machine.

If you are using the output tray extension,
fold the paper stopper, and then push the
output tray extension into the machine.

Hold the front side of the operation panel
with your hands.

Lift the scanning platform (A) until it is
locked. (You will hear an audible “click.”)

Hold the grip (A) on the right front side of
the toner cover.

Open the toner cover.

Summary of Contents for imageCLASS MF4370dn





























































































































































































































































Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands

Canon imageCLASS MF4370dn, Basic Operation Manual

Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands