Canon imageCLASS MF4370dn Basic Operation Manual Download Page 16

Page: 16 / 252

Legal Notic

Legal Notices

Legal Notices

As an

NERGY

TAR Partner, Canon U.S.A., Inc. has determined that this product meets

the

NERGY

TAR Program for energy efficiency.

The International ENERGY STAR Office Equipment Program is an international program

that promotes energy saving through the use of computers and other office

equipment.

The program backs the development and dissemination of products with functions

that effectively reduce energy consumption. It is an open system in which business

proprietors can participate voluntarily.

The targeted products are office equipment, such as computers, displays, printers,

facsimiles, and copiers. The standards and logos are uniform among participating

nations.

IPv6 Ready Logo

The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-

1 established by the IPv6 Forum.

Trademarks

Canon, the Canon logo, imageCLASS, and NetSpot are trademarks of Canon Inc. Microsoft, Windows, Windows

Server, and Windows Vista are trademarks or registered trademarks of Microsoft Corporation in the U.S. and/or

other countries.

All other product and brand names are registered trademarks, trademarks or service marks of their respective

owners.

Summary of Contents for imageCLASS MF4370dn





























































































































































































































































Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands

Canon imageCLASS MF4370dn, Basic Operation Manual

Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands