Canon imageCLASS 2200 Reference Manual Download

Page: 82 / 358

Making Prints Using the Stack Bypass

1-50

Bef

ore

ou Star

t Using

This Machine

Hold down the four corners of the envelopes firmly, so that they and the sealed or
glued portion stay flat.

IMPORTANT

•

Do not print on the underside of the envelopes.

•

If the envelopes become filed with air, flatten them by hand before loading them in the
envelope feeder attachment.

Load the envelopes as shown below.

IMPORTANT

•

When printing data from a personal computer, always load the envelopes as shown above.

Feeding
Direction

E1L_US_U_.book-INDEX Page 50 Wednesday, May 23, 2001 11:40 PM

Summary of Contents for imageCLASS 2200







































































































































































































































































































































































Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands

Canon imageCLASS 2200, Reference Manual

Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands