Canon imageCLASS 2200 Reference Manual Download

Page: 152 / 358

Adjusting the Machine (Adjustment/Cleaning)

3-42

Selecting and Stor

ing Settings to Suit y

our Needs

Call up the desired screen as follows:

Select “On” or “Off,” and press “OK.”

To disable Staple/Offset, press “Off.”

To enable Staple/Offset, press “On.”

Press “Done.”

Repeat this procedure.

The specified mode is set and the display returns to the Basic Features screen.

Turn the main power switch off. Allow at least 3 seconds, before
turning the main power switch back on.

(Additional Functions)

Exposure

E1L_US_U_.book-INDEX Page 42 Wednesday, May 23, 2001 11:40 PM

Summary of Contents for imageCLASS 2200







































































































































































































































































































































































Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands

Canon imageCLASS 2200, Reference Manual

Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands