Canon imageCLASS 2200 Reference Manual Download

Page: 263 / 358

Envelope Feeder Attachment-B1

7-19

Handling Options

IMPORTANT

•

Do not print on the underside of the envelopes (the side with the flap).

•

If the envelopes become filled with air, flatten them by hand before loading them in the
envelope feeder attachment.

Loading Envelopes

This section explains how to load envelopes in the drawer.

Press and release the button of the paper drawer in which you want
to load envelopes.

E1L_US_U_.book-INDEX Page 19 Wednesday, May 23, 2001 11:40 PM

Summary of Contents for imageCLASS 2200







































































































































































































































































































































































Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands

Canon imageCLASS 2200, Reference Manual

Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands