Canon imageCLASS 2200 Reference Manual Download

Page: 290 / 358

Finisher-J1

7-46

Handling Options

Close the front cover of the finisher.

CAUTION

•

When closing the cover, be careful not to get your fingers caught, as this may result
in personal injury.

NOTE
•

When you close the cover, the stapler unit automatically performs a “dry” stapling operation
several times to reposition the staples.

Consumables

Use only the staple cases recommended for use in this machine.

NOTE
•

We recommend that you order staple cases from your service representative before the machine
runs out of them.

E1L_US_U_.book-INDEX Page 46 Wednesday, May 23, 2001 11:40 PM

Summary of Contents for imageCLASS 2200







































































































































































































































































































































































Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands

Canon imageCLASS 2200, Reference Manual

Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands