Canon imageCLASS 2200 Reference Manual Download

Page: 205 / 358

Routine Cleaning

5-21

Routine Maintenance

While the feeder is being cleaned, the screen below appears.

Press “Done.”

Repeat this procedure.

The display returns to the Basic Features screen.

Roller Cleaning

If dirt appears on printed paper, clean the roller in the main unit as the need arises.

NOTE
•

“Adjustment/Cleaning” is made up of several screens. Select the desired item by pressing “

▼

” or

“

▲

.”

•

When “

▼

” or “

▲

” should be pressed, the indications

is displayed in this manual.

•

It takes about 15 seconds to clean the roller.

Call up the desired screen as follows:

(Additional Functions)

E1L_US_U_.book-INDEX Page 21 Wednesday, May 23, 2001 11:40 PM

Summary of Contents for imageCLASS 2200







































































































































































































































































































































































Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands

Canon imageCLASS 2200, Reference Manual

Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands