Canon imageCLASS 2200 Reference Manual Download

Page: 257 / 358

Paper Deck-L1

7-13

Handling Options

Open a package of paper, and remove the paper stack.

CAUTION

•

When loading paper, take care not to cut your hands on the edges of the paper.

IMPORTANT

•

Rewrap any remaining paper in its original package, and store it in a dry place, away from
direct sunlight.

NOTE
•

For high-quality print output, use paper recommended by Canon.

Load the paper deck with the paper with its opened surface face up.

E1L_US_U_.book-INDEX Page 13 Wednesday, May 23, 2001 11:40 PM

Summary of Contents for imageCLASS 2200







































































































































































































































































































































































Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands

Canon imageCLASS 2200, Reference Manual

Search results

Summary of Contents for imageCLASS 2200

Reviews:

Related manuals for imageCLASS 2200

Brands by name

Popular brands