
4
4
4-247
4-247
Disassembly/Assembly > Controller System > Removing the Drive Belt (L418S/L410/L190) > Procedure
Disassembly/Assembly > Controller System > Removing the Drive Belt (L418S/L410/L190) > Procedure
Removing the Drive Belt (L418S/L410/L190)
■
Preparation
1) Remove the right cover
■
Procedure
1) Close the reader unit [1] and place the host machine with its left side down.
Caution:
Be sure to hold the reader unit firmly when turning the machine with its left side down
because the reader unit will be forced open by hinge spring pressure.
2)Remove the tension unit[1].
• 1 screw[2]
F-4-658
[1]
[2]
3)Remove the shaft support[1], and remove the drive cover[2]
• 5 screws[3]
Caution:
Be sure to raise the drive cover[2] straight above slowly to prevent the gear phase
from becoming displaced.
[1]
[2]
x5
[3]
[3]
F-4-659
F-4-660
Summary of Contents for FAXPHONE L190
Page 470: ...5 5 Adjustment Adjustment Mechanical Adjustment ...
Page 480: ...7 7 Error Codes Error Codes Overview Error Codes ...
Page 484: ...8 8 Service Mode Service Mode Overview COPIER FEEDER FAX TESTMODE ...
Page 501: ... Service Tools Solvent Oil List General Circuit Diagram General Timing Chart Appendix ...