background image

1-7

Before Usin

g the Machine

Toner Cartridge

The only component of the machine that needs to be replaced is the toner cartridge, 
which yields approximately 2,000 pages based on 5% coverage of an A4-size page. 
To purchase a new cartridge, contact your local authorized Canon dealer or the Canon 
help line.

Maintaining the Toner Cartridge

Keep the toner cartridge away from computer screens, disk drives, and floppy disks. 
The magnet inside the cartridge may harm these items.

Avoid locations subject to high temperature, high humidity, or rapid changes in 
temperature.

Do not expose the cartridge to direct sunlight or bright light for more than five 
minutes.

Store the cartridge in its protective bag. Do not open the bag until you are ready to 
install the cartridge in the machine.

Save the cartridge’s protective bag in case you need to repack and transport the 
cartridge at a later date.

Do not store the cartridge in a salty atmosphere or where there are corrosive gases 
such as from aerosol sprays.

Cartridge name: 
Canon FX10 Cartridge

Summary of Contents for FAX-L100





























































































































Reviews: