Canon FAX-L100 Basic Manual Download Page 14

Page: 14 / 124

1-1

Before Usin

g the Machine

Before Using the
Machine

Machine Components

Paper delivery tray

Outputs printouts.

Paper delivery tray extension

Extension for the paper output tray.

Cartridge cover

Open it when replacing the toner cartridge or
removing jammed paper.

Notch

Used to open the cartridge cover.

Operation panel

Controls the machine.

Document release lever

Releases jammed document.

Document guides

Set to the width of documents.

Automatic document feeder (ADF)

Feeds documents automatically into the
machine for scanning.

Document feeder tray

Holds documents.

Document feeder tray extension

Extension for the document feeder tray.

Document delivery tray

Outputs scanned documents. Part of paper
stack cover.

Document delivery tray extension

Extension for the document delivery tray.

Paper stack cover

Protects paper supply in the machine from
dirt and dust.

Summary of Contents for FAX-L100





























































































































Search results

Summary of Contents for FAX-L100

Reviews:

Related manuals for FAX-L100

Brands by name

Popular brands

Canon FAX-L100, Basic Manual

Search results

Summary of Contents for FAX-L100

Reviews:

Related manuals for FAX-L100

Brands by name

Popular brands