Canon EOS D60, Service Manual

Page: 83 / 211

Part 3: Repair Information
3-5
2. DISASSEMBLY/ASSEMBLY
2.1 Terminal Cover and Front Cover
(1) Terminal cover
1. Remove two screws.
2. Open and pull the extension terminal cover, then
remove it together with the terminal cover.
(2) Front cover
1. Remove the grip rubber.
2. Remove five screws.
3. Remove the front cover.
(1)
-1
(1)
-2
5.5mm
f
g
(2)
-2
(2)
-1
(2)
-3
TOP FPC, lower
Dowel
Dowel
5.5mm
3.5mm
4.5mm
NOTE : Assembling
Route the leads so
that they do not
overlap in the
shaded area
during assembly.
The switch
(SW) on the
flexible board
must be
inside the
dowel.
Attach with DB1663B
v
m
l
NOTE : Assembling
CAUTION
Be Carefull!! High-voltage Circuit
may cause an electric shock.
Fig. 3-7 Terminal cover and front cover
Black
Orange
: Assembling
When attaching the front cover,
confirm that the cables and other
wires are not pinched.
NOTE
Discharging the main capacitor.
When the front cover is removed, be sure to discharge the main
capacitor before proceeding to the next step.
CAUTION