Canon EOS D60, Service Manual

Page: 26 / 211

Part 1: General Information
1-16
4) Flash exposure compensation cancellation: Set the
flash exposure compensation amount to 0.
* If flash exposure compensation has been set with
the external Speedlite, the external Speedlite's flash
exposure compensation will override the camera's
flash exposure compensation setting.
* Flash exposure compensation cannot be set in the
Full Auto and Programmed Image Control modes.
* The flash exposure compensation icon in the
viewfinder lights.
9-8 AE Lock: (1) Auto AE lock
* In the One-Shot AF mode with evaluative metering, AE
lock takes effect when focus is achieved.
(2) AE lock button
* Sets AE lock at any time.
* AE lock button does not work in the Full Auto and
Programmed Image Control modes.
* Regardless of the metering mode, center partial
metering will be used.
* During AE lock, pressing the AE lock button again
renews the AE lock.
* When the built-in flash or an external Speedlite is
used, the AE lock button works as an FE lock button.
9-9 Multiple exposures: Not possible
10. Shutter
10-1 Type: Vertical-travel, mechanical, focal-plane shutter with all
speeds electronically-controlled
* Mechanical shutter: Both curtains have dedicated
magnet control. (Curtain speed: 2.9 ms/15.0mm)
10-2 Shutter speeds: 1/4000 to 30 sec. (1/3- and 1/2-stop increments),
bulb, X-sync at 1/200 sec.
* For bulb exposures, the elapsed exposure time is
displayed on the LCD panel.
10-3 Shutter release: Soft-touch electromagnetic release (No cable-release
socket)
10-4 Shutter-release time lag: Stop-down by up to 4.5 stops from maximum aperture
and excluding AF operation time:
(1) During SW-1 ON, time lag between SW-2 ON and
start of exposure: 100 ms
(2) Time lag between simultaneous SW-1/SW-2 ON and
start of exposure: 240 ms
10-5 Long exposure None
noise reduction:
10-6 Self-timer: Electronically-controlled 10-sec. delay
* Operates in all shooting modes.